Back to Top

Hi, Guest!

  LOKASI :  Kabupaten Sidoarjo

Bergabung Selama :

BAGIKAN :   

Bagikan :

Tape Wrap for Leak Pipe CV.JAVATECH-SEAL Terlengkap

BEST DEAL
GOT A LEAK? reduce downtime with 4” x 180” wraps pipes up to 5” dia 2” x 60” wraps pipes up to 1.5” dia see over for full information Use to repair/ reinforce pipes, T-joints, elbows, valves, cables etc. PERMANENTLY REPAIRS ALMOST ANY MATERIAL! Pow-R Wrap is an innovative product that can be applied to high as well as non-pressure applications and permanently repairs almost any material including copper, steel, galvanised pipe, all plastic pipes, rubber and cement. It is a water activated fiberglass tape that sets like steel! APPLY EPOXY PUTTY IMMERSEWRAP INWATER WRAP AROUND PIPE TIGHTEN FOR APPROX 4 MINS Each complete Pre-Mixed, Pre-Measured, Ready-to-use kit contains: • Resin-impregnated fiberglass tape in foil bag • Epoxy putty repair patch • 1 pair protective gloves • Full instructions The benefits of Pow-R Wrap are: • It’ s quick and easy so reduces downtime • It lasts for years • It’ s very safe and conforms to a variety of international standards All you need is: • A bucket of water • A Pow-R Wrap kit • 30 minutes No messy mixing or tools required - easy to use kit • Permanently repairs leaks - even under water! • Repairs leaks in 30 minutes - sets like steel • Withstands pressures of up to 600psi • Heat resistant to 600° C • Non-toxic - meets EPA601 regulations • Resistant to a wide range of chemicals • Works on wet, dry, clean, dirty or corroded pipes Pow-r Wrap is ideal for all fluid bearing pipes and hoses: • Water • Steam • Air • Gas • Sewage • Fuel • Hydraulics and is recommended for structural repairs to: • Brackets • Fencing • Supports • Exhausts & Mufflers • Tools Technical Information Form Impregnated Fiberglass Cloth Colour Grey Fabrication Method Wet Lay-up Number of Wraps Required 8 ( min) for High Pressure Cure cycle @ 70° F/ 21° C 30 minutes ( wet) Hardness - cured laminate 53 Barcol Heat resistance 1197° F/ 647° C Dielectric strength 16.969 Line pressures 600 PSI/ 40 KPA Shelf life Unlimited when properly stored Mechanical Resistance MEASURE Method PSI KPA Flexural Strength ASDN D 709-71 16100 1073 Tensile Strength ASTM D 638 24000 1660 Compression Strength ASTM D 695-77 26600 1773 Temperature cycle test 4 layers cycled from 50° F to 90° F ( 10° C to 33° C) : No delamination. Approved to EPA601 and AS4020* Tested and approved for use with potable ( drinking) water when used in accordance with instructions. Toxicity Contains no harmful solvents. Can be used on water and food service lines. Chemical Resistance POW-R WRAP is chemically resistant to diesel fuel, petroleum products, halocarbons, and ( after curing) alcohols. * and other international standards
  •     dari   1   halaman
  •